• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Homie Holds

Home Improvement Tools Reviews & Information

  • Blog
  • Home Tools
  • Automotive Tools
  • Power Tools
  • Cleaning Tools

DIY Guide: How to Unclog Roundup Sprayer

by David Ernest

If you are struggling problem, then learn how to unclog roundup sprayer.

But how?

Don’t worry, I am going to explain it for you. But before that, you should learn something more.

Why call an exterminator every month when you can kill bugs by yourself? You don’t really need to be an expert to eliminate pests that infest your home. You just need the right chemical and the right tool.

And there’s no better tool than a Roundup Sprayer. Since these gadgets went out to the market, they turned the tedious routine of spraying into a breeze. Certainly, if you buy one of these you’ll save all the money they currently spend on exterminators.

But, as with any other tool, you have to provide periodic maintenance to keep it operational. Lack of maintenance is the worst enemy of a Roundup Sprayer. If after each use, your tool remains stored and inactive for months, you’ll certainly have problems.

And what’s the most common trouble of all? Clogged nozzles. Fortunately, this problem doesn’t mean the end of your tool. In fact, it has a fairly simple solution. If you already have a Roundup Sprayer, you certainly need to know this.

In this article, you’ll learn everything you need to know to maintain your roundup sprayer and extend its lifespan.

What is Unclog?

Unclog is the act of removing an obstacle that prevents the free passage of a substance through an open channel. For example, unclogging a pipe means removing residues that prevent the normal water flow. If you read this article carefully, you can learn how to unclog roundup sprayer.

Usually, during the unclogging process, chemical or mechanical procedures are used to remove or move the obstacle. For example, chemical methods include applying corrosive or lubricant substances.

On the other hand, mechanical methods include the application of high-pressure air or water or using a drain cleaner cable. Usually, mechanical methods are more effective for these purposes.

In the case of Roundup Sprayers, obstructions are very common. The main cause is the crystallization of fumigation chemicals. These products are basically composed of salts dissolved in water. When water evaporates, salts form crystals around tubing and nozzles, preventing fluid from flowing freely.

Step by Step Guide: How to Unclog Roundup Sprayer?

This step by step DIY guide article will show you how to unclog roundup sprayer. So keep reading.

Unclogging a Roundup Sprayer is the easiest task in the world. You don’t need to spend too much money and neither need to call someone else to do it. This step-by-step guide shows you how to unclog your Roundup Sprayer as a real expert.

Check the Cap

Remove the cap in the tank and confirm the dip tube is still joined to the cap. Sometimes the tube tends to break off and fall to the bottom of the tank. If there’s still liquid inside, it’s convenient to pour it into a different container to easily remove the tube.

Then, join again the tube with the cap. If necessary, use a metal hose clamp to avoid the hose detaches again.

After putting the cap in place, verify that the knob is turned to “ON” or the spout is in a vertical position.

Check the Spray Nozzle Pattern

Some models allow you to block the flow by turning the nozzle. Maybe the nozzle is in the block position, but you think there’s something stuck in there. So, check the home bug spray nozzle pattern is okay and the nozzle is rotated into it.

Prime the Sprayer

To start spraying, the tube must be completely filled with liquid. So, you have to prime the sprayer. To do this, hold that bottle above and press the trigger until it begins perfectly to spray. If nothing happens, certainly there’s something obstructing the flow.

Unclog the Nozzle

To unclog the nozzle, you just need to dip the tip in soapy warm water for several minutes. This solution will help dissolve the crystals accumulated in the tip. Finally, scrub with a sponge and rinse with plenty of water. Then, prime the sprayer following the above procedure.

As you can see, unclogging a Roundup Sprayer is easier than you imagined. Remember to wash the nozzle after each use to prevent clogging.

Conclusion

Certainly, lack of maintenance is the main cause of clogging. After using, wash your Roundup Sprayer inside and outside. To avoid crystallization, don’t store your sprayer leaving liquid product inside.

Before using, apply each of these tips to ensure a long lifespan. If you use an electric sprayer, remember to replace the batteries constantly. Also, remove the batteries before storing to prevent corrosion.


Note: Learn how to keep safe your outside party from bugs.

Filed Under: Home Tools, Blog

Leave a Reply Cancel reply

You must be logged in to post a comment.

Recently Reviewed Tools

  • Best Hard Floor Cleaner Machine In 2022 – Reviews & Buying Guide
  • Best Ventless Air Conditioner Reviews In 2022 & Buying Guide
  • Best Bug Spray for Home In 2022 – Reviews & Buying Guide
  • Best Home Garage Car Lift Reviews 2022 & Buying Guide
  • Home
  • About
  • Contact
  • Privacy Policy
  • Affiliate Disclosure


Featured on Hometalk.com DMCA.com Protection Status

Copyright © 2022 - All rights reserved by Homie Holds

HomieHolds.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, HomieHolds.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.